beautypg.com

Lights – HONDA 2008 Accord Coupe User Manual

Page 329

background image

Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.

Turn on the lights to make sure
the new bulb is working.

Reinstall the inner fender cover.
Then reinstall the holding clips,
and lock them in place by pushing
on their centers.

Open the trunk.

Pull the bulb straight out of its
socket. Push the new bulb straight
into the socket until it bottoms.

Remove the socket by turning it
one-quarter turn counterclockwise.

Insert the socket back into the
light assembly. Turn it clockwise
to lock it in place.

Remove the screws in the center
of each of the two fasteners on the
side of the trunk lining. Pull the
lining back.

Determine which of the three
bulbs is burned out: stop/taillight,
back-up light or turn signal light.

5.

6.

7.

2.

1.

4.

3.

5.

Lights

Replacing Rear Bulbs

326

SCREW

SOCKET

BULB

2008 Accord Coupe

Table Of Contents

Main Menu