Honeywell HCM-2051 - Manual (Page 5)

• Place the Motor Housing back into the base.
• Position the Water Tank in the humidifier and push into place. Some water will empty into
the base.
• Once the filled tank has been positioned, do not attempt to move the humidifier. If it has to
be moved, unplug the humidifier and remove the water tank first.
CAUTION: DO NOT POUR WATER INTO THE GRILLE ON TOP OF THE HUMIDIFIER.
DOING SO MAY DAMAGE THE HUMIDIFIER OR CAUSE PERSONAL INJURY.
P O W E R
CAUTION: DO NOT PLUG IN THE HUMIDIFIER WITH WET HANDS AS AN
ELECTRICAL SHOCK COULD OCCUR.
• With the power switch in the OFF position, plug the filled humidifier into a
polarized 120V outlet. DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it
will only fit one way.
H U M I D I T Y C O N T R O L
1. Set the fan speed to the desired position (Fig. 4).
HIGH: For fast humidifying
MED: For everyday moisture control
LOW: For quieter nighttime operation
2. Set the Moisture Control knob (Humidistat) to the
highest setting by turning the dial clockwise to
No. 9 (Fig. 4).
NOTE: If the humidifier fan will not start or restart
when you select a fan speed, the Moisture Control
may be set too low. Turn the dial clockwise
to No.9. This is the highest setting. The Desired
Humidity light will be Off when the unit is
producing moisture (Fig. 4).
Turn the humidifier OFF if the humidity level feels too moist or you notice
condensation forming on the walls and/or windows.
Fig. 4
FILLING CONTINUED
OPERATION
HCM-2051 OM (eng only) 6/25/01 1:40 PM Page 5