haier AS072XVERA - Manual (Page 13)

11
A
Operation
Dry
Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press, operation mode changes
as follows:
Select Drying operation shows" "
Dry operation starts
Select temp. button
Press TEMP button
Every time the button is pressed, temp. setting increases 1 C
Every time the button is pressed, temp. setting decreases 1 C
If the button is kept pressed, setting will increase or decrease
quickly.
Press FAN button. For each press, fan speed changes as
follows:
Press ON/OFF button
Unit stops running, and when
entering this mode for the next
time, it will show the previous setting
Unit runs at the speed displayed on LCD.
In DRY mode, when room temp.becomes 2 C lower than temp.
setting,unit will run intermittently at LOW speed regardless of FAN
setting.
3
2
1
4
5
Ultra-low air flow
Temp.setting+2 C
Temp.setting
On reaching 2 C lower than temp.
setting,unit will run in mild DRY mode.
COOL operation starts when room
temp. is higher than temp. setting.
ON
OFF
TEMP
HEALTH FAN
MODE
SLEEP SWING
CLOCK
TIMER
SET
LOCK LIGHT RESET
1
2
3
Remote
controller
AUTO COOL DRY FAN HEAT
Remote
controller
LOW MID HIGH AUTO
STERILIZE
HEALTH AIRFLOW
FRESH
CODE
5
3
4