haier AS072XVERA - Manual (Page 11)

Operation
Auto
2
1 Press ON/OFF button
Unit starts running.
The previous status appears on the display
(except. TIMER, SLEEP mode)
Press MODE button. For each press,
operation mode changes as follows:
4
Remote
controller
Press ON/OFF button
Unit stops running.
Press FAN,For each press, operation mode
changes as follows:
Remote
controller
ON
OFF
TEMP
HEALTH FAN
MODE
SLEEP SWING
CLOCK
TIMER
SET
LOCK LIGHT RESET
Unit runs at the speed displayed on LCD.
When fan speed is AUTO,it is changed automatically
according to the indoor temperature.
Note:
During Auto run operation, temp. setting will be shown in LCD display, unit will select heating,
cooling or fan operation according to the room temp.
STERILIZE
HEALTH AIRFLOW
FRESH
CODE
AUTO COOL DRY FAN HEAT
Select Auto run,
" " appears and auto run starts.
LOW MID HIGH AUTO
2
5
5
1
3
Select temp. button
Press TEMP button
Every time the button is pressed, temp.
setting increases 1 C
Every time the button is pressed, temp.
setting decreases 1 C
If the button is kept pressed, setting will
increase or decrease quickly. 3
9
4
A