Hotpoint double oven cookers - Manual (Page 9)

The controls
9
Switch on the electricity supply to the cooker at the Cooker Control Unit.
Hotplate Controls
Top
Oven
Control
Timer
Main
Oven
Control
Top Oven
Neon Main Oven
Neon
Grill
Control
Dual Circuit Control - EW74
Dual Circuit Control - EW75
Hob Controls
Dual Circuit Control
As each control knob is turned clockwise, numbers from 6 - 1 on the control
knob decrease. Setting 6 is the highest/hottest. Setting 1 is the
lowest/coolest. These are 6 fixed positions for cooking.
This is to control a dual circuit plate with two elements. By turning the knob
clockwise the whole hotplate is switched on, numbers 1-4 on the control
knob, 4 is the highest setting. With the knob turned anti-clockwise, only the
inner part of the hotplate is switched on, this is also indicated by numbers
1-4 on the control knob, 4 is the highest setting. Variable power for either
the whole or the inner part of the hotplate is obtained by selecting any
number between 1 and 4.
The off position is identified by an ‘0’.
The hob hot warning light will operate soon after any of the heating areas
are switched on. It will remain illuminated until the ceramic surface has
cooled down.