beautypg.com

Т³гж 12, External equipment connections, Digital audio output – haier HL42BG User Manual

Page 12: Dtv connection, Digital set-top box, Installation

background image

PC/DVI

Audio In

Optical


AUDIO

L

R

HDMI/DVI IN 2

PC IN

VIDEO

Y

Pb

Pr

PC/DVI

Audio In

COMPONENT IN

Optical


AUDIO

L

R

Digital Set-top Box

This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive
Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).

How to connect
Use the TV`s COMPONENT , PC or HDMI/DVI
jack for video connections, depending on
your set-top box connector. Then, make
the corresponding audio connections.

How to use
1. Turn on the digital set-top box. (Refer to the
owner`s manual for the digital set-top box.)
2. Use INPUT on the remote control to select
COMPONENT , PC or HDMI/DVI source.

Send the TV`s audio to external audio equipment (stereo
system) via the Digital Audio Output (Optical) port.

How to connect
1. Connect one end of an optical cable to the TV Digital
Audio(Optical) Output port.
2. Connect the other end of the optical cable to the digital
audio (optical) input on the audio equipment.
See the external audio equipment instruction manual for
operation.

Note
When connecting with external audio equipments, such
as amplifers or speakers, please turn the TV speakers off.

Digital Audio Output

Caution: Do not look into the optical output port.
Looking at the laser beam may damage
your vision.

External Equipment Connections

DTV connection

Installation

Signal

480i

480p

720p

1080i

COMPONENT

HDMI/DVI

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Yes

HDMI

12 TV LCD-TFT

This manual is related to the following products: