Units - depth, Units - temp, Units - distance – Humminbird 531338-1_C User Manual
Page 50
45
Units - Depth
Units - Depth selects the unit of measure for all depth-related
readouts.
To change the Units - Depth setting:
1. Highlight Units - Depth on the Setup main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Depth
setting. (Meters [International Models Only], Feet, Fathoms; Default is Meters for
International models, and Feet for Domestic models)
Units - Temp
(International Only)
Units - Temp selects the unit of measure for all temperature-related readouts. International
Models Only.
To change the Units - Temp setting:
1. Highlight Units - Temp on the Setup main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Temp
setting. (Celsius, Fahrenheit; Default = Celsius)
Units - Distance
(with Temp/Speed or GPS Receiver)
Units - Distance selects the units of measure for all distance-related readouts, and will
appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has
moved at least once, or if a GPS Receiver is connected.
To change the Units - Distance setting:
1. Highlight Units - Distance on the Setup main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Units - Distance
setting. (Domestic Models: Statute Miles, Nautical Miles; Default = Statute Miles;
International Models: Meters/Kilometers, Meters/Nautical Miles, Feet/Statute
Miles, Feet/Nautical Miles; Default = Meters/Kilometers)