Start and programmes, Special programmes, Programme option modifiers – Hotpoint TCD970 User Manual
Page 9
9
GB
Impor
tant
Inf
ormation
Installation
Description
The Displa
y
Star
t and
Pr
ogrammes
Laundr
y
W
arnings and
Sug
g
estions
T
ro
u
b
leshooting
S
e
rvice
Maintenance
and Care
Start and Programmes
Special Programmes
Easy Iron Programme
‘Easy Iron’ is a short 10 minute programme (8 minutes of heat followed by a 2 minute cool tumble period) which
fluffs the fibres of clothing that have been left in the same position/location for an extended period of time. The cycle
relaxes the fibres and makes them easier to iron and fold.
!
‘Easy Iron’ is
not a drying programme
and should not be used for wet articles of clothing.
For best results:
1.
Do not load more than the maximum capacity. These numbers refer to the dry weight:
Fabric
Maximum load
Cotton and Cotton mixtures
2.5kg
Synthetics
2kg
Denim
2kg
2.
Unload the dryer immediately after the end of the programme, hang, fold or iron the articles and put
them away in the closet. Should this not be possible repeat the programme.
The ‘Easy Iron’ effect varies from one fabric to the next. It works well on traditional fabrics like Cotton or Cotton mix,
and less well on acrylic fibres and on materials such as Tencel®.
Wool Programme
●
This is a programme for tumble dryer safe garments marked with the symbol .
●
It can be used for load sizes up to 1kg (approximately 3 sweaters).
●
We recommend that garments are turned inside out before drying.
●
This programme will take about 60 minutes, but may take longer depending on the size and density of the load
and the spin speed used in your washer.
●
Loads dried using this programme are usually ready to wear, but on some heavier garments the edges may
be slightly damp. Allow these to dry naturally as over-drying could damage garments.
!
Unlike other materials, the mechanism of wool shrinkage is irreversible; i.e. it will not stretch back to original size
and shape.
!
This programme is not suitable for Acrylic garments.
Mini Load
Available with Cotton High Heat and Synthetic programmes. Used for loads between 1 and 2kg.
This programme optimises Automatic programme for smaller loads and improves the Time to End estimation.
Programme option modifiers
Mixed Dry
Available with Cotton High Heat and Synthetic programmes.
This option used after selecting either a Cupboard Dry or Hanger Dry dryness level. This allows you to remove
items when they have reached Hanger Dry or Iron Dry.
When the dryer detects that the load has reached Iron Dry, the display shows: IRON DRY REACHED and the
buzzer sounds for 2 minutes, open the door and remove items that you need to iron.
Then close the door and press the Start/Pause button and the programme resumes.
!
If you do not open the door during the 2 minute period, the dryer will resume drying without you pressing the
Start/Pause button.
Hanger Dry programme then continues and ends with END OF CYCLE. EMPTY THE WATER BOTTLE
Cupboard Dry programme continues until the dryer detects that the load has reached Hanger Dry, the display
shows: HANGER DRY REACHED and the buzzer sounds for 2 minutes, open the door and remove any items that
you need to hang up to finish drying.
Then close the door and press the Start/Pause button and the programme resumes.
!
If you do not open the door during the 2 minute period, the dryer will resume drying without you pressing the
Start/Pause button.
When Cupboard Dry dryness level reached, the dryer completed the cool tumble (and, if selected, Post Care) and
ends with END OF CYCLE. EMPTY WATER BOTTLE