Harbor Freight Tools 90725 - Manual (Page 3)

SKU 90725 Page 3
7. Use eye and ear protection. Always wear ANSI approved impact safety
goggles. Wear a full face shield if you are producing metal filings or wood
chips. Wear an ANSI approved dust mask or respirator when working around
metal, wood, and chemical dusts and mists.
8. Do not overreach. Keep proper footing and balance at all times. Do not
reach over or across running machines.
9. Maintain tools with care. Keep clean for better and safer performance.
Follow instructions for batteries and changing accessories. The handles
must be kept clean, dry, and free from oil and grease at all times.
10. Maintain Batteries. Remove batteries when not in use for a prolonged
period of time to prevent corrosion and damage to this tool.
11. Avoid unintentional starting. Be sure the switch is in the Off position
when not in use.
12. Stay alert. Watch what you are doing, use common sense. Do not operate
any tool when you are tired.
13. Check for damaged parts. Before using any tool, any part that appears
damaged should be carefully checked to determine that it will operate
properly and perform its intended function. Check for alignment and binding
of moving parts; any broken parts or mounting fixtures; and any other
condition that may affect proper operation. Any part that is damaged should
be properly repaired or replaced by a qualified technician. Do not use the tool
if any switch does not turn On and Off properly.
14. Guard against electric shock. Prevent body contact with grounded
surfaces such as pipes, radiators, ranges, and refrigerator enclosures.
15. Replacement parts and accessories. When servicing, use only
identical replacement parts. Use of any other parts will void the warranty.
Only use accessories intended for use with this tool. Approved accessories
are available from Harbor Freight Tools.
16. Do not operate tool if under the influence of alcohol or drugs.
Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not
operate the tool.
17. Maintenance. For your safety, service and maintenance should be
performed regularly by a qualified technician.
90725 Laser Level.P65 10/13/03, 9:06 AM 3