Hisense Group C2005US - Manual (Page 17)

Displaying the current channel number on screen
Press the
DISPLAY button on the remote control, and the current channel number will display on the top-right
corner of the screen. Whenever you want to cancel it, press the
DISPLAY button again.
Switching between two channels
Press the
the screen will
RECALL button on the remote control to return to the previous channel that you have just viewed.
Press the
RECALL button repeatedly, and
alternate between the present and previous channels.
Selecting the signal source
Press the
TV/AV button to select TV or AV mode.
Using the TV features
-15-
Appendix
Cleaning and care
WARNING: TV sets use high voltage. Do not try to remove the cabinet back. Refer servicing to
qualified service technicians.
To clean the TV screen:
1 ) Unplug the TV to avoid a possible shock hazard.
2 ) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm
water to clean the TV screen and trim. Do not use too much water because water spills into the cabinet
can cause damage to the TV.
3 ) Wipe off any excess moisture with a clean dry cloth.
4 ) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.
Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near
the cabinet. These chemicals can damage the finish of the cabinet.