Hisense Group C2005US - Manual (Page 12)

-10-
Using the TV features
Using the PRESET menu
1 ) Press the
MENU button repeatedly until the PRESET menu appears as
shown on the right.
2 ) Press the
CH+ button to select the item you want to adjust.
or
CH-
The item allows the TV to automatically detect all active channels and store them in its memory.
Press
CH+ or CH- to start it. You can also press the MENU button to stop the auto search if you want.
Note: The
PRESET menu will not appear when the TV set is in AV mode.
AUTO-SEARCH
Press to select the channel that you wish. You can also use the channel number
buttons to change the channel.
CH+ or CH-
POSITION
The item allows you to skip a channel. If
some channel is set to ON, the channel will be skipped when
you select a channel by pressing
CH+ or CH-.
Press
VOL- or VOL+ to select ON or OFF.
SKIP
The item allows you to select the signal receiving method.
change the item between
AIR and CATV.
If you use an antenna, choose
AIR.
If you use cable, choose
CATV.
Press
VOL- or VOL+ to
ANTENNA
POSITION 17
PRESET
SKIP
ANTENNA
AUTO-SEARCH
OFF
AIR
Select Adjust
Changing channels
To change the channel, you can
1) Press
on the remote control or on the TV.
2) Press the channel number buttons.
You can change to a specific channel by pressing the channel number buttons. For example, to select channel 123,
press the
1-- button first , then press the 2 button and the 3 button.
CH+ or CH-
q CH p