haier L26A16 - Manual (Page 32)

Other functions
Display function
NICAM
If the broadcaster is transmitting Bilingual sound service. The
button on the remote controller will allow up to 2 separate languages
to be selected. You can press the
button to make a choice.
/
/
If current program number, color system and sound system are to be
displayed on the screen, press DISPLAY button, and all the related
information will appear at right up corner of the screen.
If the DISPLAY button is pressed again, the displayed information
will disappear.
(If the program is named, its name will also appear ).
Auto program scan
1
If you want to select a desirable program, you may scan all the TV
programs in memory. You can simply press SCAN button to do this.
Press scan button once, there are nine pictures on the screen.
2
If you want to stop the function during auto tunning, simply press
SCAN button again.
3
AUTO
B/G
Sleep
The TV set will switch automatically to standby at the preset time
with the SLEEP time on. You may set the sleep time,
Operate as follows:
1
Press SLEEP button repeatedly to select the number of preset
minutes, the timer will be set in sequence:
0Min
5Min 15Min 30Min 60Min 90Min 120Min 0Min
Note: If the Off time on the TIMER menu is set, when press first SLEEP button,
the
time will display on the screen.
2
After the sleep time is set, the Indication will appear on the screen
1minute prior to expiry of set time.
remaining
3
If remaining time of set timer is to be displayed, press SLEEP
button again. The TV set will switch off automatically at the preset
time, press CH+/- button to turn on again.
4
If to cancel sleep time, press SLEEP button repeatedly to set as 0.
Note:
The Time On setup
and the SLEEP setup
is absolute one
another.
Picture Still
Press Still button, the picture will be still; if to cancel, press Still
button again, the picture will resume.