Hotpoint HWD24X - Manual (Page 6)

GB
6
Care and maintenance
Switching the appliance off
Disconnect your appliance from the electricity
supply before carrying out any work on it.
Cleaning the appliance
• The external parts may be cleaned using a
sponge which has been soaked in lukewarm water
and neutral soap. Use specialised products for
the removal of stubborn stains. After cleaning,
rinse and dry thoroughly. Do not use abrasive
powders or corrosive substances.
• The inside of the compartment should be cleaned
using hot water and detergent, then rinsed
thoroughly and dried with a soft cloth. Do not use
abrasive products.
• We recommend that detergents are not sprayed
directly onto the control panel, but that a sponge
is used instead.
Never use steam cleaners or pressure cleaners on
the appliance.