2 rtcm received data – Holux GM-82 User Manual
Page 10

GM-82 User’s manual
10
Speed
0.2
km/hr Measured horizontal speed
Units
K
Kilometers per hour
Checksum *6E
End of message termination
(1). SiRF Technology Inc. does not support magnetic declination. All “course over ground” data are geodetic WGS84
directions.
4.1.6 MSK Receiver Signal (MSS)
Table C-9 contains the values for the following example:
$GPMSS,55,27,318.0,100,*66
Table C-9 MSS Data Format
Name Example
Units Description
Message ID
$GPMSS
MSS
protocol header
Signal Strength
55
dB
dB SS of tracked frequency
Signal-to-Noise Ratio
27
dB
SNR of tracked frequency
Beacon Frequency
318.0
kHz
Currently tracked frequency
Beacon Bit Rate
100
100 bits per second
Note – The MSS NMEA message can only be polled or scheduled using the MSK NMEA input message.
4.2 RTCM Received Data
The default communication parameters for DGPS Input are 9600 baud, 8 data bits, stop bit, and no
parity. Position accuracy of less than 5 meters can be achieved with the GPS-82 by using Differential GPS
(DGPS) real-time pseudo-range correction data in RTCM SC-104 format, with message types 1,2, or 9. As