Power down timer – HandHeld Entertainment Quick Check ImageData Barcode Verifier Quick Check 890 User Manual
Page 34
B - 2
Power Down Timer
Note: This option applies to battery operation only.
When there is no activity within a specified time period, the QC890 Verifier
powers down. Scan the appropriate Power Time-Out barcode to change the
time-out duration (in seconds).
If there are no scans during the “scanner power time-out timer” interval, the
QC890 Verifier goes into power down mode. Whenever a scan occurs, the
“scanner power down timer” is reset. Default = 15 minutes
No Power Down Timeout
5 minutes
*15 minutes
60 minutes
120 minutes