Setting the clock – Hitachi VT-M272A User Manual
Page 27
Getting Started (Initial Setup)
27
Here are what the options mean:
1 ANTENNA/CABLE
Press 1 to select the type of receiving setup you have:
Internal or external antenna
cable
Alternate cable (if CATV1 doesn't give you the channels you expect)
2 AUTO CHANNEL SETTING
Press 2 to automatically program the VCR to receive all the channels that come in on
your antenna or cable.
3 ADD OR ERASE CHANNEL
Press 3 to bring up a screen that lets you add new channels or limit the channels to the
ones you most often watch.
4 VCR CODING
Press 4 to enable the remote control to control a second VCR. Options are
and
5 MOVIE RETURN
Press 5 to select whether you want prerecorded movies (safety tab removed) to
automatically rewind, eject, and turn off the power when the movie is over and no
prerecorded signals exist. Options are
Setting the Clock
This is easy to do and important for your later timed recordings. You'll need to set the
clock when first hooking up your VCR, and any time the power goes out more than 30
minutes.
When you first plug in the VCR or after a power interruption, the clock display will read
"--:--".
To set the clock, press GUIDE, then press 6 to bring up the Clock Set screen: