beautypg.com

Function (continued) size switching – Hitachi 42PD8800TA User Manual

Page 40

background image

38

ENGLISH

FUNCTION (continued)

Size Switching

Each time

button of the remote control is pressed, the screen display size is

switched in sequence, and the status will be displayed at the bottom of the screen.

TV/AV signal input

TV/AV1/AV2/AV3/AV4/AV5/HDMI1/HDMI2

4:3

Panoramic

Zoom

Cinema

Full

You can display the image at optimum condition by selecting display size depending on the current output image as
shown below.

Current Output

Image

(Input Signal)

Display Size

To display suitable screen as follows.

(4:3 Signal)

4:3

Play a 4:3 image on screen faithfully. Blanking occurs on both sides.

Panoramic

Play a 4:3 image which enlarges horizontal and vertical size of the
middle in equal scales, and displays both sides appearing much wider.

(Vista)

Zoom

Play a 16:9 image in 4:3 image (Vista size) faithfully.
*In some case, slight blanking may remain at the top and bottom.

(Cinema)

Cinema

Play a 21:9 image in 4:3 image (Cinema size) expanding vertically.
*In some case, slight blanking may remain at the top and bottom.

(Squeeze)

Full

Play a 4:3 image faithfully in the standard vertical size and
horizontally squeezed.

Information

Aspect ratio represents horizontal : vertical ratio on screen.
For example, vista image is 16:9 in 4:3 image.

Position Adjustment

Vertical picture position can be adjusted for Panoramic, Zoom, and Cinema mode
as follows.
1. Press ▲▼buttons while operating the picture size display.
2. “Position” display will appear.
3. Adjust the position by ▲▼buttons.

Adjustment range of each picture size are as shown below.

Panoramic:

-12 to+12 (The position cannot be adjusted in Panoramic 2 mode.)

Zoom and Cinema:

-31 to+ 31

*When 1080i/60 component signal is received, it can be adjusted only 0 to +1.

Vertical Size Adjustment at Panoramic Mode

While displaying a picture at Panoramic mode, the mode can be switched further between Panoramic 1 and Panoramic 2
with ◄ ►buttons on the remote control. By selecting Panoramic 2, the vertical size is scaled down so that you can
see the whole image without blanking.

9

16

3

4

16(or 21)

9

ZOOM button

Position + 31

Press

Position - 31

Press

42PD8800TA 55PD8800TA

HITACHI

This manual is related to the following products: