Hitachi 42PD8800TA - Manual (Page 21)

19
BASIC OPERATION (continued)
First Time Setup
When you turn ON the TV for the fi rst time, your TV automatically leads to the settings
of “Language” and “Auto Tuning.”
1. The fi rst screen appeared will ask you to choose the language of your TV’s display.
2. Select the language you preferred from the list and press OK button.
3. Once selecting the language, “Auto Tuning” screen appears to start scanning
channels.
NOTE
If you want to change the setting after completing this fi rst time setup, press
MENU
button and set up individually. Refer to 21 22 .
Volume UP/DOWN
1. To increase the sound volume, press button on the remote control,
or Volume Up button on the control panel.
The Volume Indicator value on the screen will shift right.
2. To decrease the sound volume, press button on the
remote control or Volume Down button on the control panel.
The Volume Indicator value on the screen will shift left.
Mute
1. To mute the sound, press button on the remote control.
The sound of the unit is temporarily turned Off.
The color of the Volume Indicator will turn into magenta
while muting the volume.
2. To turn the sound back, press button again, or Volume Up button on
either remote control or the control panel.
The color of the Volume Indicator will turn back to green.
NOTE
You can decrease the volume by pressing
button
while muted the volume.
Setup
Auto Tuning
Scanning Channel Number: 33
Cancel OK
Cancel
P
P
SD MEMORY
CARD
PUSH-EJECT
OK
PH35814
Volume Up button
Volume Down button
The Volume Indicator
Volume 15
Language
ޓޓޓޓޓEnglish
ޓޓޓޓޓޓ૕ਛᢥ
ޓޓޓޓޓ❥㜚ਛᢥ
ޓޓޓޓޓРуссkий
ޓޓޓޓޓ
ޓޓޓޓޓᣣᧄ⺆
Select Return Exit
Volume Up/Down button
Mute button
42PD8800TA 55PD8800TA
HITACHI