haier HWM70-10 - Manual (Page 13)

After the power is switched on, press it to
start the machine.
During working, push it to pause.
During pause, push this button to restart
and go on working.
START/PAUSE button
Remarks: After pressing POWER ON/OFF to connect power supply, if the washing
machine lasts idle more than 10 min, it would automatically shut off the supply.
Press POWER ON/OFF button
to connect power supply.
After power is connected, pressing this
button will cut off the supply.
POWER ON/OFF button
RESERVIATION button
Push the button to select the reserve
washing time from 2 to 24 hours.
Pressing the button, the numeral tube
displays the reserved hours to the wash
cycle end. The point light flashes to
indicate in-reservation.
To indicate -- during sensing.
To indicate remaining min. During
program running.
To indicate remaining reserved time
(hrs) during reservation period.
To indicate fault symbols for abnormal
conditions (see page 16)
Numeral tube
+
POWER
ON / OFF START
PAUSE
RESERVATION
SURPLUS(MIN) RESER
VE
(HOURS
LA
TER)
Lock
Child safety lock program
Start up: Push the RESERVATION and SPIN and POWER ON/OFF buttons
at the same time. After 2 beep sounds, can set the other program. After all
the program set is finished
push the START/PAUSE button, push and hold
RESERVATION and SPIN buttons for more than 2 seconds at the same
time. After a beep sound, the child safety lock program works; all buttons
are locked and cannot be selected.
Release: push and hold RESERVATION and SPIN buttons for more than
2 seconds at the same time. After a beep sound, the child safety lock
program is released.