Harbor Freight Tools 2433 User Manual

Page 11

SKU 02433

PAGE 11

For technical questions, please call 1-800-444-3353;

Troubleshooting section at end of manual.

If using the Brush Wand (34C), insert the Brush Wand into the Brush Adapter (35C)
and twist the Wand into the Adapter until the Wand locks in place. Then insert the
Adapter into the Spray Wand Extension (8C), and twist the Adapter into the Extension
until the Adapter locks in place. Pull the Wand to make certain it is secure. The
Brush Wand is used to apply detergent at low pressure.

(See Figure F.)

Attach the High Pressure Hose (24C) to the left/lower side of the Pressure Washer.
Attach the

female

part of the Quick Connector Set (36C) to the right/ lower side of

the Pressure Washer. Screw the

male

part of the Quick Connector Set onto a heavy

duty garden hose (not included). Then, attach the

male

part of the Quick Connector

Set to the

female

part of the Quick Connector Set.

(See Figure G.)

BRUSH ADAPTER (35C)

SPRAY WAND EXTENSION (8C)

BRUSH WAND (34C)

FIGURE F

Insert the Spray Wand (9C) or Turbo Wand (33C) into the Spray Wand Extension
(8C), and twist the Wand into the Extension until the Wand locks in place. Pull the
Wand to make certain it is secure.

(See Figure E.)

FIGURE E

SPRAY WAND (9C)

TURBO WAND (33C)

SPRAY WAND EXTENSION (8C)

REV 10/04

HIGH PRESSURE HOSE

(24C)

FEMALE

QUICK COUPLER

(36C)

MALE

QUICK COUPLER

(36C)

HEAVY DUTY

HOSE

(NOT INCLUDED)

FIGURE G

LEFT SIDE VIEW

RIGHT SIDE VIEW