Humminbird PIRANHAMAX 190CPT - Manual (Page 13)

7. Secure all cables to the base, using the included zip ties, at the mount
points shown in the illustration (see the illustration Tying Down the
Cables).
8. Turn the base right side up and pull up gently on the battery tie-down
straps to remove the slack.
NOTE: You will need to perform more assembly procedures, as well as charge the
battery for 8 hours, before you install the battery into the portable case. See
Charging and Installing the Battery for more information.
Tying Down the Cables
Transducer
Jumper Cable
Zip Tie
Mounting
Point
Power Cable
7