Hoover Ultra Plus - Manual (Page 10)

Do not
use solvent or petroleum based prod-
ucts to clean the machine.
Read “Before you begin cleaning”
instructions on page 9.
Move speed selector to LO for gentle
cleaning or Hi for normal cleaning.
properly
grounded outlet.
Do not clean over floor electrical out-
lets.
small
use only the floor nozzle with the bare
floor attachment in place and
selector in
OFF position
uid spills (1 gallon or less, never to
exceed
inch in depth)
When picking up spills on bare floors,
Do not use the SteamVac deep cleaner
to pick up flammable or combustible
uids or chemicals.
How to attach bare floor
attachment
Disconnect deep cleaner from
cal outlet.
.q
q
q
slowly
slowly
slowly
(Note: Some may be required to
rotate and snap attachment into place.)
To
avoid saturating carpet, do not use
more than 4 wet strokes over one
area. Always end with dry strokes.
To clean floor
Read Before you begin cleaning
instructions on page 9.
Do not use the SteamVac deep clean-
er on hardwood floors.
Do not use any type of wax with your
SteamVac deep cleaner.
Move speed selector to the Lo or HI
position for scrubbing or OFF if
scrubbing is not desired.