Assembly step 4 finish, Assembly step 3 – Horizon Fitness T53 User Manual

Page 8

Text mode
Original mode

1. Connect the console cable. Carefully tuck
wires in mast to avoid damage.

NOTE: Do not pinch the wires

Assembly Step 4

FINISH

1. Place console assembly into its correct
position.
2. Place Lock Washer (E) and bolt (D) into left
upright support and tighten.
3. Place Arc Washer (F) and bolt (D) into left
upright support and tighten.
4. Repeat STEPS 2 and 3 for the right-side
upright support.

NOTE: Do not pinch console cable or grip pulse
wires.

Assembly Step 3

This manual is related to the following products:

T51 T52