Philips GC2105 - Manual (Page 6)

General description (fig. 1)
A Spray nozzle
B Filling cap (GC2225/2220/2215/GC2130/2126/2125/2120 only)
C Filling opening
D Shot-of-steam button 9
(GC2225/2220/2215/GC2130/2126/2125/2120/2115/2110 only)
E Spray button T
F Steam control
O = no steam
Á = minimum steam
q = moderate steam
(GC2225/2220/2215/GC2130/2126/2125/2120 only)
w = maximum steam
1 = Calc-Clean function
G Extra-steam function (GC2105 only)
H Temperature light (all types) and automatic shut-off light
(GC2225/GC2130 only)
I Temperature dial
J Mains cord
K Temperature indicator
L Type plate
M Water tank
Important
Read these instructions for use carefully before using the appliance and
save them for future reference.
◗ Check if the voltage indicated on the type plate corresponds to
the local mains voltage before you connect the appliance.
◗ Only connect the appliance to an earthed wall socket.
◗ Do not use the appliance if the plug, the cord or the appliance
itself shows visible damage, or if the appliance has been dropped
or is leaking.
◗ Check the cord regularly for possible damage.
◗ If the mains cord is damaged, it must be replaced by Philips, a
service centre authorised by Philips or similarly qualified persons
in order to avoid a hazard.
◗ Never leave the appliance unattended when it is connected to the
mains.
◗ Never immerse the iron and the stand, if provided, in water.
◗ Keep the appliance out of the reach of children.
◗ The soleplate of the iron can become extremely hot and may
cause burns if touched.
◗ Do not allow the cord to come into contact with the soleplate
when it is hot.
◗ When you have finished ironing, when you clean the appliance,
when you fill or empty the water tank and also when you leave the
iron even for a short while: set the steam control to position O,
ENGLISH 6