Hitachi 50EX8K/10B - Manual (Page 27)

-SET UP- FUNCTIONS
27
-SET UP- FUNCTIONS
Press MENU, 1, and ENTER to display 5 of the -SET UP- Functions.
There are a total of 9 -SET UP- Functions.
Use the CURSOR UP or DOWN to scroll through the functions, or use the
number buttons to highlight a function. The functions highlighted in purple
can be selected by pressing ENTER. To exit the on-screen display, press
MENU or RECALL.
NOTE: To see an autodemonstration of the on-screen display and to practice
using the remote control, press and hold the POWER button on the TV set for
approximately 5 seconds. Press the POWER button on the TV again to end
the autodemonstration.
• CLOSED CAPTION
When CLOSED CAPTION is highlighted in purple, press ENTER to see
the following display:
Closed captions are the dialogue, narration, and/or sound effects of a
television program or home video which are displayed on the TV screen.
Your local TV program guide denotes these programs as
.
DISPLAY: ON/OFF is to turn the display on or off.
MODE: CAPTION is for the program you are viewing.
MODE: TEXT is for additional information such as news reports or a TV
program guide. This information covers the entire screen and viewing the
TV program is not possible. TEXT may not be available with every
program.
CHANNEL: 1 is used for the primary language (usually English).
CHANNEL: 2 is sometimes used for a second language (may vary by
region).
Use the CURSOR UP or DOWN to highlight the function to change, press
ENTER to change the function, and press MENU to exit.
NOTE:
The word MUTE will not be displayed if the DISPLAY is ON. If you do
not have sound, make sure MUTE is not set.
• INITIAL SETTING