Hilti WSR1000 - Manual (Page 6)

8
The tool is designed for the following uses
Applications Range of uses
Cutting wood Cutting openings for door and window frames
Cutting wood with embedded nails and screws
Cutting squared timber up to 220 mm thick
Cutting composites (wood, insulation material, metal)
Cutting softwoods and hardwoods
Rip sawing of materials in sheet form
Cutting concrete forming components to length and to size
Cutting metal Cutting metal pipes of up to 35 mm dia. to length
Cutting plastic pipes of up to 150 mm dia. to length
Cutting openings in metal and plastic pipes
Cutting composites to length (wood, insulation material, metal)
Demolition Cutting through metal and plastic pipes
Cutting through cable trays, ventilation ducts and installation channels
Cutting up sheet metal and sheet metal trays
Cutting through gas concrete blocks
Cutting drywall / plasterboard panels
Technical data
WSR 1000
Nominal power rating 1000 W
Nominal voltage ✱ 110 V 220 V 230 V 240 V
Nominal current input ✱ 11.7 A 5.6 A 5.4 A 5.2 A
Mains frequency 50–60 Hz
Weight of tool 3.95 kg
Dimensions (l×w×h) 570Ч90Ч140 mm
Stroke rate 500–2950/min.
Stroke 32 mm
Stroke rate regulation Variable stroke rate,
4 stroke rate settings
Blade clamp Keyless, for standard 1 /
2
″ blades
Noise (pressure) level < 92 dB (A)
Typical vibrational acceleration
(weighted)
< 5.0 m/s 2 under no load
Orbital action Selectable
✱ The tool is offered in different versions for various mains voltages. Please refer to the information on the
type plate for the nominal voltage and nominal current input of your tool.
Main features of the tool Class II electrical protection (double insulated) Z (as per EN 50144)
Anti-vibration system (additional operator protection)
Mechanical slip clutch (additional gearing protection)
Vibration-absorbing grip
Keyless blade clamp
Saw blade inversion possible
Keyless contact shoe adjustment
Infinitely variable stroke rate preselection with speed control switch
Right of technical changes reserved