Warning, Specifications, Unpacking – Harbor Freight Tools 96456 User Manual
Page 6: Set up instructions, Operating instructions

Page 6
SKU 96456
For technical questions, please call 1-800-444-3353.
SpeciFicAtiOnS
Gasoline Engine
7.5 HP Briggs & Stratton Intek/Snow Engine 5BSXS.2051HF
Engine Approvals
2006 EPA Phase II; 2006 CA Emissions Regulations
Engine Fuel Type
Unleaded Standard Gasoline, Carburetor system
Engine Ignition
Electronic Ignition, Pull Start
Engine Fuel Tank
1 Gallon Capacity with shut-off valve
Brushes
2 Brushes mounted side by side.
Brushes Dimensions
15” Overall Diameter 25” Wide Overall
Tool Structure
Gasoline powered Rotary Sweeper mounted on Steel Cart
Drive Wheels
Pneumatic 10” x 3.50 Maximum Pressure 30 PSI
Tire Type and Capacity
Tractor Tread 300 LBS. Capacity @ 30 PSI
Front Caster Wheels
2 Front Swivel Casters with Rigid Black Rubber Wheels
Drive Type
¾” Belt Drive
Net Weight
127.8 Lbs.
unpAcKing
When unpacking, check to make sure that the item is intact and undamaged. If
any parts are missing or broken, please call Harbor Freight Tools at the number shown
on the cover of this manual as soon as possible.
Set up inStructiOnS
read the entire iMpOrtAnt SAFetY inFOrMAtiOn section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
risk of accidental starting; resulting in serious personal
injury. turn the power Switch of the tool to its “OFF”
position and unplug the tool from its electrical outlet before
assembling or making any adjustments to the tool.
note: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram near the end of this manual.
OperAting inStructiOnS
read the entire iMpOrtAnt SAFetY inFOrMAtiOn section at the
beginning of this manual including all text under subheadings therein
before set up or use of this product.
wArning
wArning