Philips HI518 User Manual
Page 12
After the self-clean process
- Put the iron on its heel.
- Put the plug in the wall socket and let the iron heat up to allow the
soleplate to dry.
- Unplug the iron when the amber pilot light has gone out.
- Move the iron gently over a piece of used cloth to remove any water
stains that may have formed on the soleplate.
- Let the iron cool down before you store it.
Storage
1
Make sure the appliance is unplugged and set the steam control
to position 0.
C
2
Empty the water tank.
C
3
Let the iron cool down.Wind the mains cord around the cord
storage facility and fix it with the cord clip.
C
4
Always store the iron standing on its heel in a safe and dry
place.
Guarantee & service
If you need information or if you have a problem, please visit the Philips
website at www.philips.com or contact the Philips Customer Care
Centre in your country (you will find its phone number in the
worldwide guarantee leaflet). If there is no Customer Care Centre in
your country, turn to your local Philips dealer or contact the Service
Department of Philips Domestic Appliances and Personal Care BV.
ENGLISH
12
4239 000 44177 28-09-2004 11:52 Pagina 12