Philips GC2520 - Manual (Page 11)

Problem Cause Solution
There are water
droplets on the
fabric.
(GC2640/GC2620/GC2530/
GC2528/GC2520/GC2510
only).The set temperature is
too low for steam ironing.
Set the temperature dial to a position in
the steam area (2 to MAX). Put the iron
on its heel and wait until the temperature
light has gone out before you start ironing.
Water drips out of
the soleplate after
the iron has cooled
down or has been
stored.
The iron has been put in
horizontal position while
there was still water in the
water tank.
Empty the water tank and set the steam
control to position O after use. Store the
iron on its heel.
EnglISh 11