Harbor Freight Tools 66514 - Manual (Page 7)

SKU 66514 for technical questions, please call 1-800-444-3353. Page 7
troubleshooting
problem possible causes likely Solutions
Fountain Pump will not
start
No power at outlet. 1.
Circuit breaker tripped. 2.
Cord not connected. 3.
Check power at outlet. 1.
Check circuit breaker for outlet. 2.
Check that cord is plugged in. 3.
Low flow from
Nozzle(s)
Possible clogging of Filter Sponge. 1.
Possible excess debris lodged in 2.
Impeller.
Possibly the two Switches located
3.
on the Tee Fitting System are only
partially ON.
Check and clean the Filter Sponge 1.
per instructions in Maintenance
Section on Page 8.
Check and clean debris from
2.
Impeller per instructions on Page 8.
Check both Switches. Turn both
3.
fully towards the symbol of the open
bicycle lock.
follow all safety precautions whenever diagnosing or servicing the
appliance. disconnect power supply before service.
pleaSe read tHe following carefully
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS lIST AND ASSEMBly
DIAGRAM IN THIS MANUAl AS A REFERENCE TOOl ONly. NEITHER THE MANUFACTURER OR
DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT
HE OR SHE IS qUAlIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS
qUAlIFIED TO REPlACE ANy PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/
OR DISTRIBUTOR ExPRESSly STATES THAT All REPAIRS AND PARTS REPlACEMENTS SHOUlD
BE UNDERTAKEN By CERTIFIED AND lICENSED TECHNICIANS, AND NOT By THE BUyER. THE
BUyER ASSUMES All RISK AND lIABIlITy ARISING OUT OF HIS OR HER REPAIRS TO THE
ORIGINAl PRODUCT OR REPlACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTAllATION OF REPlACEMENT PARTS THERETO.
partS liSt and aSSemBly diagram
part description Q’ty
1 Power Plug 1
3 Back Cover 1
4 Main Housing 1
5 Coupling Nut 1
6 Bubbling Nozzle 1
7 Output Tube 1
8 Bell Nozzle 1
9 Spray Nozzle 1
10 Tee Fitting System 1
11 Impeller 1
12 Filter Body 1
13 Plastic Filter 1
14 Filter Cover 1