Hotpoint HDA6009 - Manual (Page 5)

Cycle Selection Hints
is important to follow the Loading instructions.
●
WATER SAVER—For dishes with light soils that
●
POTS & PANS—For items such pots, pans
have not dried on, or that have extra preparation
cookware, dishes and glasses with heavy soil.
before loading. It saves water and energy.
Everyday dishes may be included.
●
RINSE & HOLD—For rinsing partial loads which
●
NORMAL WASH—For loads of everyday dishes,
be washed later. detergent.
glasses cookware with medium soils. Designed
●
PLATE WARMER—For warming clean dishes
to yield high performance on soils. serving plates for the serving of hot food.
What Happens in Each Cycle
●
You’ II hear occasional sounds:
●
During the drying period:
—Soft food disposer shredding action. —The motor stops.
—Drain valve opening to pump water out. — Water vapor comes through the vent by the
—Timer control as cycle progresses.
door during drying when water is
—Detergent cup opening.
being pumped out.
Time
Sequence
POTS & PANS
NORMAL WASH 1
WATER SAVER
& HOLD 10
‘ }: Unextended times. These will be
minutes energy is selected.
Drying Options:
HEATED DRY. cycles RINSE & minutes time.
ENERGY SAVER. Drying is turned Dishes
Good starts with HOT water
To get dishes clean dry you need hot water. To help you water the proper temperature,
your dishwasher has a WATER HEAT feature that automatically senses the temperature the water
in the wash cycle and heats it, if necessary, to the proper temperature. This water heating feature may allow
you to turn down your household
heater and save energy if you’re willing to let the dishwasher run a
longer while it heats water to the proper temperature. For good washing drying, the entering water must be
least To prevent dish damage, inlet water should not
5