To beam an application, To receive beamed information – Handspring Treo 180 User Manual
Page 77
Chapter 5
Page 77
5. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your communicator.
To beam an application:
1. Press Option
and then press Menu
to access the Applications Launcher.
2. Press Menu
.
3. Under App, select Beam (/B).
4. Tap the application you want to transfer.
N
N
N
No
o
o
otttte
e
e
e::::
Some applications are copy-protected and cannot be beamed. These are listed with
a lock icon next to them.
5. Tap Beam.
6. When the Beam Status dialog box appears, point the IR port directly at the IR port of the
receiving communicator.
7. Wait for the Beam Status dialog box to indicate that the transfer is complete before you
continue working on your communicator.
To receive beamed information:
1. Turn on your communicator.
2. Point the IR port directly at the IR port of the transmitting communicator to open the Beam
Status dialog box.
3. When the Beam dialog box appears, select a category for the entry.
T
T
T
Tiiiip
p
p
p:
: :
:
If you do not select a category the entry is placed in the Unfiled category.
4. Hold Option
and press Return
for Yes.
T
T
T
Tiiiip
p
p
p::::
When you receive beamed information with the lid closed, you don’t need to respond
to the Beam dialog box; simply press the top scroll button for Yes, or the bottom scroll
button for No.