Handspring Treo 180 - Manual (Page 197)

Chapter 8 Page 197
6. Enter the telephone number to access the modem connected to your computer.
7. If needed, enter a dial prefix (such as “9”) to access an outside line, and then tap the Dial
Prefix check box.
T T T Tiiiip p p p:::: You can enter a comma in the field to introduce a “pause” in the dialing sequence.
Each comma equals a two second pause.
8. Select the Disable call waiting check box to avoid an interruption during the wireless HotSync
operation.
9. If you want to use a calling card to place the call, select the check box and enter the calling
card number.
10. Hold Option and press Return to finish.
Selecting the conduits for a wireless HotSync operation
The Conduit Setup dialog box on your communicator enables you to define which files and/or
applications synchronize during a wireless HotSync operation. You can use these settings to
minimize the time required for wireless synchronization.
To change the Conduit Setup for a wireless HotSync operation:
1. Press Option and then press Menu to access the Applications Launcher.
2. Tap the HotSync icon .
3. Press Menu .
4. Under Options, select Conduit Setup (/D).
5. Tap the check boxes to deselect the files and applications that you do not want to synchronize
during a wireless HotSync operation. The default setting is to synchronize all files.
N N N No o o otttte e e e:::: Applications that do not have a database (such as games) do not synchronize — even
if you select the item in the Conduit Setup dialog box.
6. Hold Option and press Return to finish.
Performing a wireless HotSync operation
After you prepare your computer and your communicator, and select your Conduit Setup options,
you are ready to perform a wireless HotSync operation.