Honeywell HEAT BLASTER HZ-615 User Manual
Page 4
QUICK HEAT™ FEATURE
• Quick Heat™ will propel a blast of warm air out of your baseboard. This can help
heat your room more quickly. You will hear a fan operating in this mode. You can also
turn the Quick Heat™ setting off and the heater will operate with silent heat.
This heater is equipped with several devices and features for added protection.
• A high temperature safety control prevents overheating (Hi Limit).
• A thermal circuit breaker.
• This heater was created using a high quality safety plastic.
SAFETY FEATURES
TROUBLESHOOTING
If your heater shuts off unexpectedly or fails to operate, one of your heater safety
features may have been activated to prevent overheating.
• Be sure the power cord is plugged into a working electrical outlet. The power
light will illuminate.
• Check for any obstructions. If you find an obstruction, turn the heater
OFF and unplug it.
• Allow the heater to cool completely, then remove the obstruction. Wait at
least 10 minutes, then re-plug in the heater and follow the OPERATING
INSTRUCTIONS for your unit.