Hobart Welding Products CHAMPION 10 - Manual (Page 30)

OM-945 Page 26
8-6. Changing Engine Oil, Oil Filter, and Fuel Filter (Onan-Powered Units)
802 353-B / S-0842
Y Stop engine and let cool.
1
Oil Drain Valve
2 1/2 ID x 7 in Hose
3 Oil Filter
Change engine oil and filter ac-
cording to engine owner’s
manual.
Y Close valve and valve cap
before adding oil and
running engine.
Fill crankcase with new oil to full
mark on dipstick (see Section
8-2).
4
Fuel Filter
5 Fuel Line
Replace line if cracked or worn.
Install new filter. Wipe up any
spilled fuel.
Start engine, and check for fuel
leaks.
Y Stop engine, tighten
connections as neces-
sary, and wipe up fuel.
4
5
1
2
Tools Needed:
Full
3