HP DB-102 User Manual
Page 3

SCOTTY WOOD FURNACE – INSTRUCTION MANUAL
Scotty
Oct-06
3
KERR SCOTTY Wood Furnace Model DB-102
Certified by the Canadian Standards Association
Manufactured by: Parrsboro Metal Fabricators Ltd.
P.O. Box 637, Crossroads
12118, Highway 209
Parrsboro, Nova Scotia, Canada
B0M 1S0
SPECIFICATIONS
Length
46 1/2”
Width
22 1/2”
Height
43”
Shipping Weight
344 lb
Fire Box 1/8”plate Length
27 1/2”
Diameter
18”
Secondary Heat Exchanger
14 gauge steel
Fire Box Door
Cast Iron
12” x 12”
Warm Air Plenum
29” x 20 3/4”
Return Air Plenum
14 ½” x 20 3/4”
Air Filter Size
16” x 20” x 1”
Blower Size
G9 – 10
Blower Motor
1/4 hp
CFM
1000 (Required)
Smoke Pipe
7” Inside Diameter
Floor to smoke pipe center
36”
Output (max)
70,000 Btu/h
Fuel
Wood 24” logs
Electrical Rating
Volts 120, Cycles 60, Amps 15
NOTE – Keep this manual in a safe place for future reference. Follow manual carefully
for the correct way to install and operate this unit.
CAUTION – Do not fire this unit until operating instructions have been read and fully
understood.
INSTALL WOOD FURNACE ONLY ON A FURNACE DUCT SYSTEM AND CHIMNEY
THAT ARE IN GOOD CONDITION AND APPROVED FOR USE.
SAVE THESE INSTRUCTIONS