Hitachi VT-MX4410A - Manual (Page 54)

TIMER RECORDING
54
appears.
TIMER
PROGRAMMING
PROG 1 2 3 4 5 6 7
DATE
START
TIME
END TIME
CHANNEL
REC
SPEED
NOTE:
If you have not yet set the clock, "SETTING CLOCK" appears. If so, follow the
steps [2] to [8] on page 15. Then, set the timer recording.
2 Select your desired program number (1 ~ 7)
Program number which is not set up flashes.
Press PLAY/
or STOP/ button until your desired program number appears.
(Example: 1)
Then, press the F.FWD/ button.
PROGRAM
NUMBER 1
DATE - - / - -
START TIME - - : - - - -
END TIME - - : - - - -
CHANNEL - -
REC SPEED - -
3 Select once, daily or weekly recording
For once recording:
Press the PLAY/
or STOP/ button repeatedly to point to "ONCE" and. then, press
F.FWD/ button.