HONDA FIT Remote Control Transmitter - Manual (Page 9)

© 2007 American Honda Motor Co., Inc. - All Rights Reserved.
9
Remote Control Code Programming
1
2
Unlock the doors.
Turn the ignition key to the “ON” (II)
position.
4 Turn the ignition key to the “OFF” (0, I)
position.
How to Program Remote
Control Transmitters
• For steps 2 through 12, each step must be completed within 5 seconds. For step 13,
within 10 seconds for each remote.
• Up to 3 remotes can be stored in memory.
• All remotes to be programmed must be on hand.
• A non programmed remote will work for this procedure.
• Turn the ignition key to the “OFF” position to complete the programming procedure.
3 Press the “LOCK” or “UNLOCK” button on
the remote control transmitter.
5 Turn the ignition key to the “ON” (II)
position.
3