Selection method of the process programs – haier HWM50-18 B User Manual

Page 15

Even there's no water in the tub, the
spinning will start after a certain period.
Do not use the "Twice wash" program
for the woolen laundries.
Wash the laundries that are prone to
lose colors separately from other laundries.
The pulsator will not rotate unless the water is filled to selected water level.

Attention

Times of pushing

button

PROCESS

If you push the PROCESS button for 6 times, it will resume the original mode, and it will
circulate like that.
The soak program can be used as fitting of the STANDARD & JEANS automatic programs.
Soak with slight stirring before wash.

Applicable procedure

Contents(the lighted indicators
indicate the programs about to run)

Spin(spin after
drain)

Wash(the washing

liquid remains in

the tub)

When the common laundries

need washing, rinsing and

spinning.

Repeat using the washing
liquid

When the laundries need

rinsing and spinning after

manual washing
When the laundries need only

spinning after manual

washing (first drain then spin)

If the laundries are very dirty,

or the sleeve and collar are

dirty, first soak then wash

Wash, rinse, spin

Rinse, spin

Wash, rinse(the

rinsing liquid

remains in the tub)

Repeat using the washing

liquid

Selection method of the process programs

Selected procedure
program

Soak Wash Rinse Spin

Soak, wash,
rinse, spin

When the power is switched on, the washing machine will check the cloth automatically.
After that, the water level is set automatically. To select other water level, push the button.

4 Push the WATER LEVEL button to select

suitable water level