Hitachi V-21W - Manual (Page 74)

63
Function menu screen
4-4 Knee/clip sub-menu
KNEE POINT 128 0 127 Sets the level where knee function begins operating.
KNEE SLOPE 128 0 +10 127 Sets knee response slope.
WHITE CLIP 128 0 +32 127 Sets the white clip level.
INITIALIZE Simultaneously press the buttons to initialize
Knee/clip sub-menu items to values shown in rectangles.
4-5 White shading sub-menu
Corrects vertical white shading due to the lens.
EXTENDER OFF ON On is indicated when using a lens provided with an extender
(indication only).
White shading is set respectively for extender on and off.
AUTO SETUP Automatic white shading adjustment. Start by adjusting the green
channel shading with MANU G ADJ.
Next, adjust the auto white by pushing the button for 1 second.
Then, adjust the auto white by pushing the button for 1 second.
MANU R ADJ 128 0 127 Use when adjusting white shading manually.
G ADJ 128 0 127
B ADJ 128 0 127
INITIALIZE Simultaneously press the buttons to initialize White
Shading sub-menu items to values shown in rectangles.
4-6 Flare sub-menu
R FLARE 128 0 127 Adjust red signal flare correction.
G FLARE 128 0 127 Adjust green signal flare correction.
B FLARE 128 0 127 Adjust blue signal flare correction.
INITIALIZE Simultaneously press the buttons to initialize Flare sub-
menu items to values shown in rectangles.