Homelite CSP3816 - Manual (Page 7)

UK - Page 7
SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and more safely.
SYMBOL NAME EXPLANATION
Indicates danger, warning or caution. It means
attention!!! Your safety is involved.
Your manual contains special messages to bring
attention to potential safety concerns and machine
damage, as well as helpful operating and servicing
information. Please read all the information carefully to
avoid injury and machine damage.
Wear eye, hearing and head protection when operating
this equipment.
The SAFE-T-TIP ® nose guard on the guide bar helps
prevent kick-back.
No smoking, sparks or open flame when mixing fuel or
refilling fuel tank.
Hold and operate the saw properly with both hands.
Do not operate the saw using only one hand.
Engines produce carbon monoxide which is an odourless,
deadly poison. Do not operate in an enclosed area.
Danger – beware of kick-back.
Avoid bar nose contact.
Wear non-slip gloves.
To stop the engine, move the switch to the “O” STOP
position.
I = ON to Run
O = OFF to Stop
Safety Alert Symbol
Read Your Operator’s Manual
Eye, Hearing and Head Protection
SAFE-T-TIP ® Nose Guard
No Smoking
Operate with Two Hands
One Handed
Gloves
Bar Nose Contact
Kick-back
Carbon Monoxide
Switch
RUN
“O”
STOP