haier L15T11W-A - Manual (Page 27)

DVB-T Main Menu Operations
Timers
When setting a timer the pin code must be supplied to a parental controlled
service. So that the timer can override any parental control when is triggers. A
timer could be triggered in standby or viewing mode. The LED in front panel is
blinking and the receiver is locked during a timer is running. You can unlock the
receiver by pressing the TIMER button then the EXIT button, then the timer is
cancelled.
When a timer is triggered whilst in standby mode the service for which the timer
was set will be selected. At the end of the timer the receiver will return to standby
mode.
Add Timer
Add timer function allows you to create a new timer.
1) Press the button to highlight Add and press OK to enter the Add New Timer
screen when you are in the programme Timer screen. You could also enter this
screen by pressing the TIMER button during viewing.
2) Set the following items for the new timer:
- Channel Number: Select the channel by press the button.
- Repeat: Periodicity of the timer. You can select from the list of once, daily and
weekly(from Monday to Sunday) by pressing the button.
- Date(dd/mm/yyyy)
: The day, month
and year. Press button to select the position and digits button to set.
- Start Time(hh:mm): Begin time of the service to record with the format hh:mm.
- Duration: Total time to record with the format hh:mm.
3) Press OK to save this timer and EXIT to give up this timer.
Modify timer
This function allows you to modify the programmed timers from the timers list.
1) Press button to select Modify in the Programmes Timers screen.
2) Press button to select th timer you want to modify and OK button to enter
the Modify Timer screen. All items of this timers are displayed.
3) Modify the items with the way described in Add Timer.
4) Press OK button to save the changes and return to Programme Timer screen.
5) Press EXIT button to give up the changes and return to Programme Timer
screen.
Delete Timer
You can delete the programmed timers from the timers list.
1) Press button to select Delete in the Programme Timers screen.
2) Press button to select the timer you want to delete and press OK to delete.
A pop-up confirmation window is displayed if you select Yes and press OK button.
The selected timer will be deleted.
Info Panel Timeout
This sub-menu allows you to set the display duration of the info panel. You can
select from the list of 3,4,5,6,7,8,9,10,11 seconds by pressing button.
(only available when Repeat is set Once)
/
/
/
/
/
/
/
/
/