Hitachi 42HDS69 - Manual (Page 59)

On-Scr
een Display
Setup
Set The Quick Start Options
This feature will select QUICK START UP options. Set
this feature to ON to have the TV tune channels (both
Analog and Digital) quickly when first turning the TV on.
Set this feature to OFF to save electricity. Selecting ON
for the QUICK START UP feature will activate the TV
tuners circuits when the TV is in “standby mode” which
is commonly referred to as “off”. This will allow you to
quickly tune to channels when first turning the TV on.
Digital signals often change and this feature will
monitor any changes and prepare the television to
quickly present a picture. A small amount of electricity
is used to continually monitor signals when this feature
is selected.
Reset The Software
Set The Quick Start Options
Setup
Move SEL Select
Select ON to have the TV tune
channels quickly at 1st turn on.
Select OFF to save electricity
Off On
Set The Inputs
Set The Screen Saver OR
Set The Closed Captions
Set The Menu Options
CableCARD Information
Set The Output Terminals
Set The Quick Start Options
Setup
Reset The Software
Move SEL Select
59
Set The Inputs
Set The Screen Saver OR
Set The Closed Captions
Set The Menu Options
CableCARD Information
Set The Output Terminals
Set The Quick Start Options
Setup
Reset The Software
Move SEL Select
This feature shows software information and easy
upgrade procedure. This function allows the TV
software to be upgraded by using a flash card (MMC
CARD). If a future software upgrade is required for your
TV, HITACHI will notify and provide you with a flash
card. In order to receive written notification and the
flash card, please complete and return the warranty
card.
1. Insert MMC CARD
2. Press the CURSOR PAD
̆
or
̄
to highlight
UPGRADE NOW.
3. Press the SELECT button to select and start
upgrading.
4 . Unplug the AC power cord when the UPGRADE is
complete.
NOTE: Any power interruption during the upgrade
process will cancel the upgrade. When this
happens, repeat the upgrade procedure.
Reset The Software
Setup
Move SEL Return
Software Version # : Main Vxxxx.xxxx
MMC Software Upgrade
Upgrade Now
Please Insert MMC card before upgrading.
Reset TV Settings
No Yes
OR
Reset TV Settings
This function allows you to Reset
all TV Settings to the
original factory settings on all modes duriong the next
2. Press the SELECT button or CURSOR PAD ̈ to
select Reset The Software.
3. Use the CURSOR PAD ̄ to access at the Reset
softkey.
4. Press the SELECT button to Reset the TV Settings.
power on/off.
1. Use CURSOR PAD ̆, ̄ to highlight functions.
(Select "Yes" to return all settings to the factory
default after main power OFF/ON.)
NOTE: If YES is selected, ALL TV
MENU SETTINGS will be reset to the original factory settings on all
modes during the next power on/off.