Harbor Freight Tools 98904 - Manual (Page 2)

SKU 98904 for technical questions, please call 1-800-444-3353 Page 2
Specifications
Operating Pressure 0 -160 PSI
Air Inlet and Outlet Size
Inlet: 1/2” -14 NPT (female thread)
Outlet: 1/4”-18 NPT (male thread)
Features Replaceable air filter element
Filter 40 micron
save this Manual
You will need the manual for the safety warnings and precautions, assembly instructions, operating and main-
tenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice number on
the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.
safety Warnings and precautions
Warning: When using tools, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment.
read all instructions before using this tool!
Keep work area clean 1. . Cluttered areas invite injuries.
observe work area conditions 2. . Do not use in damp or wet locations. Don’t expose to rain. Keep work
area well lighted. Do not use in the presence of flammable gases or liquids.
Keep children away
3. . Children must never be allowed in the work area. Do not let them handle this product
or other machines, tools, or extension cords.
store idle equipment
4. . When not in use, this product must be stored in a dry location to inhibit rust. Always
lock up and keep out of reach of children.
use the right tool for the job
5. . Do not attempt to force a small tool or attachment to the work of a larger
industrial tool. There are certain applications for which this product was designed. It will do the job better
and more safely at the rate for which it was intended. Do not modify this product and do not use this product
for a purpose for which it was not intended.
do not overreach
6. . Keep proper footing and balance at all times. Do not reach over or across running
machines.
dress properly
7. . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protective,
electrically nonconductive clothes and nonskid footwear are recommended when working. Wear restrictive
hair covering to contain long hair.
use eye and ear protection
8. . Always wear ANSI-approved impact safety goggles when using and servicing
this product and/or air tools. Wear a full face shield if you are producing metal filings or wood chips. Wear
a NIOSH-approved dust mask or respirator when working around metal, wood, and chemical dusts and
mists.
Maintain tools with care
9. . Keep clean for better and safer performance. Follow instructions for lubricating
and changing accessories. Inspect periodically and, if damaged, have them repaired by an authorized
technician. The Filter/Regulator must be kept clean, dry, and free from oil and grease at all times.
disconnect power
10. . Unplug air compressor (not included) when not in use.
do not exceed maximum air pressure of 160 psi 11. .
avoid unintentional starting 12. . Do not carry any air tool with your finger on the trigger, whether it is plugged
in or not.