haier AU142AFAAA - Manual (Page 17)

GUIDE TO OPERATION
15
Adjusting up/down air flow direction
Up/down direction can be adjusted by using the SWING button on the remote controller.
Each time pressing this button, the mode changes in the following sequence.
SWING No indication
(louver stopped)
Change to the AIRFLOW mode.
SWING LOUVER STOPPED
Louver moves in upward and
downward directions continuously.
When the LOUVER button is
pushed during SWING mode,
it stops swinging at the just
angle.
Recommendable stopping angle of the louver
Avoid direct air flow to the body
for many hours.
Avoid downward blowing opera-
tion of cooling mode for many
hours.
Do not touch the swing louver
during swing operation.
Please use the Swing button of
remote controller. If adjusted by
hand, it would cause an injure.
(Only for 24,28,36,42 series.)
CAUTION
COOL
and
DRY
HEAT
(Horizontal Blowing)
(Downward Blowing)