Humminbird AS GR4 - Manual (Page 13)

Navigation X-Press TM Menu
(Navigation Views Only)
The Navigation X-Press TM menu provides access to the settings
most frequently used. Press the MENU key once while in the Bird's
Eye View, the Track or the Combo View to access the Navigation
X-Press
TM menu.
NOTE: Menu choices will vary depending on system settings, such as
whether you are currently navigating.
The Navigation X-Press TM menu will be added to the menu
system when a GPS is connected to the Matrix Fishing System,
and will contain the following choices:
• Mark
• Zoom
• Go To
• Save Current Track
• Clear Current Track
• Skip Next Waypoint (Only When Navigating)
• Cancel Navigation (Only When Navigating)
• Remove Target (Only if a Target is Active)
• Remove Grid (Only if a Grid is Active)
• Sonar Window (Combo View Only).
Mark
Mark allows you to mark the position of a waypoint, either at the
current boat location, or, if the Cursor is active, at the current Cursor location.
To Mark a Waypoint:
1. Highlight Mark on the Navigation X-Press TM menu.
2. Use the RIGHT 4-Way Cursor Control key to mark the location of a Waypoint.
Zoom
Zoom allows you to change the scale of the Bird's Eye, Track and
Combo Views.
To Zoom:
1. Highlight Zoom on the Navigation X-Press TM menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to increase or decrease the Zoom level.
Navigation X-Press TM Menu
21
Sonar X-Press TM Menu
(Sonar Views Only)
The Sonar X-Press TM menu provides access to the settings most
frequently-used. Press the MENU key once while in any of the
Sonar Views to access the Sonar X-Press
TM menu.
NOTE: Menu choices will vary depending on system settings such as
whether the unit is set for Advanced User mode.
The Mark menu selection will be added to the Sonar X-Press TM
Menu when a GPS is connected to the Matrix Fishing System.
See your Matrix Fishing System Operations Manual for
information on the standard Sonar X-Press
TM Menu choices.
Mark
Mark allows you to mark the position of a waypoint, either at the
current boat location, or, if the Cursor is active, at the current
Cursor location.
To Mark a Waypoint:
1. Highlight Mark on the Sonar X-Press TM menu.
2. Use the RIGHT 4-WAY Cursor Control key to mark the location of a Waypoint.
Sonar X-Press TM Menu
20