H-P Products Electric Powerhead Electroglide - Manual (Page 7)

Handle
Release Pedal
ELECTROGLIDE 7
Edge Cleaner
Active brush edge cleaners are on
both sides of the Electroglide.
Therefore, guide either side of the
Electroglide along baseboards or
next to furniture to help remove
dirt trapped at carpet edges.
Overload Protector
The Electroglide has built-in
protection against motor and belt
damage should the brush jam. If
the brush slows down or stops, the
overload protector button pops up
and shuts off the Electroglide
automatically, while the power unit
motor continues to run. To reset
the system, just push in the over-
load protector button.
Suction Control
The suction control allows you to
easily change the vacuum suction
for different fabric and carpet
weights. Opening the control
decreases suction for drapes and
lightweight rugs, while closing the
control increases suction for
upholsteries and carpets.
Handle Release Pedal
The handle release pedal allows
you to lower the wand and handle
for extended and easier reach
under furniture.
PERFORMANCE FEATURES
Decrease
Suction Increase
Suction