Harbor Freight Tools Butler 95845 - Manual (Page 7)

Page 7 SKU 95845 for technical questions, please call 1-800-444-3353
fiGure 5
Power Cord Leading
to the Solar Panel with
Stake (4) (not shown)
warning: avoid any electrical wires or cables hidden underground.
Use the two side knobs on the side of the Solar Panel (4) to tilt the Solar Panel to ab-
sorb the suns rays for charging.
See Figure 4 on page 5.
With the Cord from the back of the Park Bench connected to the Solar Panel with Stake
(4), allow eight to twelve hours for the charge from the sun to take affect.
Have the Power Switch (11) that is on the back of the Solar Panel (4) in the “ON” po-
sition. Leave it in the “ON” position all the time. The sensor shuts it off when daylight
comes. If you do not want the Park Bench to light up at night, turn the Switch to the
“OFF” position.
See Figure 6, next page.
Shade will limit the amount of light you get from your product. The LED Bulbs in the Seat
Back Assembly (2) are long lasting and non-replaceable. After being in the sunlight for
at least 8 hours of charging time and the light does not come on, check your batteries.
The battery life is about one year in normal conditions
rePlacinG the batteries
The batteries are standard “AA” 500 mAH rechargeable batteries. If the lights remain
dim or do not come on at all, replace the batteries.
3.
4.
5.
6.
6.
1.