Harbor Freight Tools Butler 95845 - Manual (Page 2)

Page 2 SKU 95845 for technical questions, please call 1-800-444-3353
sPecifications
Bench Dimensions 48” Long x 15-1/4” Deep x 14-1/4” High (Back Rest)
16” High from Ground
Light Panels Qty. 6 “V” Design Crinkled Panels with LED Lighting
Solar Panel Mount 9.33 Ft. Long Cord
Batteries 3 Rechargeable “AA” 1.2V 500mAH (Included)
Net Weight 31.1 Lbs.
Maximum Weight Capacity 400 lb.
save this Manual
You will need the manual for the safety warnings and precautions, assembly instruc-
tions, operating and maintenance procedures, parts list and diagram. Keep your invoice with
this manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
General safety rules
warninG!
read and understand all instructions
failure to follow all instructions listed below may result in electric
shock, fire, and/or serious injury.
saVe these instructions
work area
keep your work area clean and well lit. Dark areas invite accidents.
keep bystanders, children, and visitors away while assembling this product.
Personal safety
.
replace or repair damaged or worn parts immediately.
do not exceed the max. weight capacity of 400 lb. Injury could occur if the bench
is overloaded or unbalanced.
do not stand or climb on this bench.
do not set up this product if under the influence of alcohol or drugs. Read warning
labels on prescriptions to determine if your judgement or reflexes are impaired while
taking drugs. If there is any doubt, do not attempt to use this product.
use eye protection when assembling this product. Wear ANSI-approved safety
impact eye goggles when assembling this product.
two adults are better at assembling this product. Be careful not to pinch fingers
between the wooden seat slats.
1.
2.
1.
2.
3.
4.
5.
6.