HANNspree LCD Monitor HF289 - Manual (Page 19)

19
SYSTEM
AUDIO INPUT
While transferring via the HDMI port, it is recommended to set
AUDIO INPUT to HDMI; if no sound is outputted, it is recommended
to select AUDIO INPUT as PC, and make sure the PC audio output
cable is connected to monitor’s LINE IN (or AUDIO IN) port.
VOLUME
Select the 「VOLUME」option to change the volume level. Enter the
option and adjust the level.
MUTE Select 「MUTE」option to switch the function On or Off.
DDC/CI
Select the 「DDC/CI」option to switch the function On or Off. (Dual
input mode optional)
NEAR TIMING MODE
Use this function to detect multiple synchronized display frequency
groups and select the best display frequency. You can set it to 「On」
or 「Off」 to activate/disable PC Sync Display Mode. (Recommended
for advanced users) [Only available with D-sub input]
Synchronized display frequency groups:
1. 640x400、720x400
2. 640x400@70、720x400@70、640x480@70
3. 1024x768、1280x768、1360x768
4. 1400x1050、1680x1050
FACTORY RESET
Select the 「FACTORY RESET」option to reset to the monitor’s
default setting. This will erase the current settings. Enter the option
and select On or Off.
INFORMATION
Display Horizontal frequency/Vertical frequency/Resolution
information.